Pay in installments of $6.07 with
,
and
Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 2 - Jul 7
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
philodendron campii lynette mature Philodendron campii 'Lynette' – Foliage FactoryPhilodendron campii 'Lynette' Philodendron campii 'Lynette' is a rosette forming Philodendron with long, narrow green leaves rising from a short central stem. The plant forms a rounded shape in the pot, with arching leaves that layer outward as it matures. The glossy to semi glossy leaves are usually narrow oblong to lance shaped, with a clear midrib and petioles that angle outward from the centre. New growth appears from the middle of the rosette,
Philodendron campii 'Lynette'
Philodendron campii 'Lynette' is a rosette-forming Philodendron with long, narrow green leaves rising from a short central stem. The plant forms a rounded shape in the pot, with arching leaves that layer outward as it matures.
The glossy to semi-glossy leaves are usually narrow-oblong to lance-shaped, with a clear midrib and petioles that angle outward from the centre. New growth appears from the middle of the rosette, while older outer leaves gradually age away around the base.
How Philodendron campii 'Lynette' forms its rosette
- Rosette habit: Short central stem with leaves arranged in a rounded form.
- Leaves: Long, narrow green blades with a glossy to semi-glossy surface.
- Pot habit: Self-supporting shape that stays upright without a moss pole.
- Base care: Needs even moisture, drainage and air around the short stem.
Wet-forest origin of Philodendron campii
Philodendron campii comes from wet tropical forests in Colombia, Ecuador, Peru and northern Brazil. Its usually epiphytic, rosulate habit suits an open mix that stays slightly moist without becoming dense around the short stem.
The central growth point should not sit in a wet, compacted mix. A proportionate pot, free drainage and careful watering help protect the base while the narrow leaves continue rising from the middle of the plant.
Caring for the short stem of Philodendron campii 'Lynette'
- Light: Give bright indirect light; direct midday sun can mark the narrow leaves.
- Watering: Water when the upper 20–30% of the mix has dried, then let excess water drain fully.
- Substrate: Use a chunky aroid mix with bark, perlite or pumice, and a moisture-holding organic component.
- Humidity: Moderate to good humidity helps fresh central leaves expand smoothly.
- Temperature: Best kept warm, ideally above 18°C, with protection from cold glass, draughts and winter transport stress.
- Potting: Choose a stable pot with drainage; repot only when roots have clearly filled the current container.
- Fertilizing: Feed lightly during active growth with a balanced fertiliser at reduced strength.
- Propagation: Usually propagated from basal shoots or specialist nursery production, not from single leaf cuttings.
- Pruning: Remove ageing outer leaves close to the base without cutting into the central growth point.
- Semi-hydroponics: Can adapt to mineral substrates such as pon, pumice, lava or LECA if the short stem stays above the wet zone.
- Growth rate: Usually moderate indoors, with the rosette widening gradually as new leaves replace older outer growth.
Philodendron campii 'Lynette' problems around the base
- Yellow outer leaves: One old leaf at a time is normal; several at once usually points to a wet root zone or low light.
- Soft base: Check the central stem and substrate depth; reduce watering and improve aeration if the base stays damp.
- Brown leaf tips: Look for irregular watering, dry air near heat sources or mineral-heavy water.
- Small new leaves: Move the plant closer to bright filtered light and check whether the roots are cramped or staying too wet.
- Pests: Check the leaf bases and undersides for spider mites, thrips, mealybugs or scale, especially on stressed plants.
Philodendron campii 'Lynette' pet safety
Like other Philodendron, Philodendron campii 'Lynette' contains calcium oxalate crystals. Keep it away from pets that bite plants, and wash hands after pruning or removing damaged leaves if your skin is sensitive.
Philodendron campii etymology and publication
The genus name Philodendron comes from Greek roots meaning tree-loving. Philodendron campii was described by Thomas B. Croat in Aroideana in 2004. The epithet campii is a Latinized commemorative name based on the surname Camp.
Order Philodendron campii 'Lynette' for a compact, narrow-leaved rosette Philodendron with a clean upright shape in the pot.
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.8 ★★★★★
Based on 1764 reviews
Sort
Product Reviews
★★★★★ 5
Great product and worth the money.
Size: 4 Panel-88'', Color: Black
Portable and stable. Perfect size and gives me the privacy I need when working from home. Stability is great as long as you place the stands correctly it won't wobble. I love it.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 8, 2026
★★★★★ 5
Attractive
Size: 4 Panel-88'', Color: Grey
The assembled product is just as described. The screens look great! I am using them to hide the cluttered shelving in my garage. The area now looks quite neat Something I must say, though, is that the assembly was extremely difficult. I had to use a silicone spray and some pounding to get the A and B poles to fit together. Also, it required a great deal of strength to stretch and hold the fabric panels so that the bars inserted in each hem lines up with the screws inserted in A/B poles. I strongly recommend having a partner to help with the assembly.
while sc and screw into poles them once inserted intetchedtne end of each pole ( and B poles barely fit together. I used silicone spray on the end and then pounded them
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on December 12, 2025
★★★★★ 5
Works
Size: 3 Panel-102'', Color: Beige, Size: 3 Panel-102'', Color: Beige
It’s beige and not white. Once install - hard to disinstall. Need a drill to put it together
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 4, 2026
★★★★★ 3
Does the job, but assembling by yourself is a nightmare
Size: 4 Panel-88'', Color: Black
Does it do the job? Yes, although as others said there are small gaps but it's not a huge deal. The price is also good. But the reason I'm giving it a 3/5 is simply because the assembly for this was a complete nightmare. I honestly don't think I would recommend this to anyone unless they have another person to help them assemble it, because doing it by myself was terrible. I don't think I'd buy this again, I think I'd opt to just spend a bit more money and save myself the trouble personally.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 29, 2026
★★★★★ 4
Reasonably adequate room divider
Size: 4 Panel-88'', Color: Beige
I'm reviewing this as I assemble it.
Couple things:
1. I didn't expect as much assembly. I've ordered dividers before and they more-or-less came as one unit. Sometimes the panels needed screwing together. These require complete assembly and come largely as three rods: two make up vertical columns and snap together. Another one (called part "C") makes the horizontal columns and you have two of these per panel (one attaches to part "A" and the other part "B"). These parts are metal with a plastic shim. Using the wood screws to attach to part "C" is a real pain in the neck. There's not much holding the panel in place so it's a little tricky.
One tactic I've found while I'm assembling that works for the initial connections from parts A and B to their respective "C" rods is to hold the screw in place with a screw driver and then rotating the rod around the screw. This will do a number on your hands if you aren't wearing gloves. This obviously doesn't work when completing the connection.
Using a driller driver on this is really near impossible because there isn't anything you can use to secure it in place. You can use it on the first panel, but as it gets longer, it becomes increasingly difficult and because it isn't wood, it's really tight. I considered drilling larger pilot holes but since there are only 4x4=16 screws I need to screw in, I just decided to use my screw driver to complete it.
2. Also related to assembly. When completing the panels (attaching parts "A" and "B" to parts "C" that have the cloth cover on it), you have to be careful that when you tighten that side that it isn't loosening the other side. Because the pilot holes are so tight, you can end up rotating the rod, which rotates it in the same direction as looser on the original side. Having someone hold the "C" rod in place while you screw it in is probably the easiest approach. I didn't have a 2nd person, so I just had to keep flipping back and forth and tightening both sides as I screwed it in. Not the worlds biggest deal, but annoying nonetheless.
3. The way the instructions are written, they seem to suggest building this thing progressively; that is, you do panel 1, then 2, connect them together, then do 3 and connect it, etc. I took a different route that I suspect saved me quite a bit of trouble, and I assembled all four panels first and THEN connected everything together.
4. For the love of God make sure you check that the plastic tip is on the same side for every panel. Otherwise, you have to take one side apart again and reverse it. On the bright side, if this happens, you've essentially bored out the pilot holes to be the correct size... which is having me question if I shouldn't have just bored them out to the appropriate width in the first place.
5. Attaching all of the panels together is also an enormous pain in the ass unless you happen to have an 88" long elevated surface. Attaching the legs either requires you to elevate one side, which will invariably twist the inexplicably cheap material in the bottom connectors... or you can attach them sideways... or you can put this thing upright, having two people hold the panels in place while you use the allen wrench to tighten the bolts on the underside. None of those are particularly great options.
NOW on to the utility itself.
1. The panels do let some light through (I didn't believe their advertising, and that was one of the reasons that I bought beige, is that I wanted it to not be too dark). They aren't transparent though, so it isn't that far off from their description. They functionally work great, and keep the mess of wires hidden and when I'm sitting at my desk, actually reflect quite a bit of light into my office. Great!
2. My wife has described these as "the most hideous piece of furniture ever conceived of by man." So it does not have spouse approval factor. Granted, she will seldom be in my office area, so that isn't the end of the world.
3. These are really hard to align in a way that doesn't look a little tacky. There are some plastic connectors but they don't do a bang up job of keeping these in place. Each panel is slightly tilted and it's... quite obvious. I may at some point make my own improvements to these to help make them more level. It's not a particularly expensive product so I wasn't expecting much so it's fine and I'm not going to ding them on the rating because of it.
All said, would I buy this product again? Probably not. It's assembly was ~90 minutes which is about 75 minutes longer than I was anticipating spending on this (not including the 5 minute writeup that I'm doing here). But am I going to return it? Also no, if for no other reason I'd be just as annoyed taking it apart and putting it in the original box to return it.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on October 31, 2023