sylke dressing SYLKE® Adhesive Wound Closure
SKU: 4590162195
sylke dressing

sylke dressing SYLKE® Adhesive Wound Closure

Sale price$22.29 Regular price$24.77
Save 10%
Size: 4

Pay in installments of $6.19 with ShopPay, AfterPay and Klarna

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 1 - Jul 6

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

sylke dressing SYLKE® Adhesive Wound ClosureDEVICE DESCRIPTION: SYLKE Skin Closure is a single use, sterile, woven silk fibroin mesh strip coated on one side with a pressure sensitive adhesive. The adhesive surface is covered by a removable release liner with a pre slit tab. HOW SUPPLIED: Each SYLKE Skin Closure strip is provided sterile in an individually sealed pouch. The device is available in multiple lengths and widths. Refer to product label and regional catalog for specific dimensions

DEVICE DESCRIPTION: 

SYLKE® Skin Closure is a single-use, sterile, woven silk fibroin mesh strip coated on one side with a pressure-sensitive adhesive. The adhesive surface is covered by a removable release liner with a pre-slit tab. 

HOW SUPPLIED: 

Each SYLKE® Skin Closure strip is provided sterile in an individually sealed pouch. The device is available in multiple lengths and widths. Refer to product label and regional catalog for specific dimensions and available packaging configurations.

INTENDED USE:  

SYLKE® Skin Closure is a sterile, single-use, silk fibroin mesh strip with a pressure-sensitive adhesive intended for topical skin closure and wound support. The device is used to hold together well-approximated skin edges of a wound, and to cover and protect the wound. The device is designed for wear of up to 14 days. SYLKE® Skin Closure may be applied by healthcare professionals or, where permitted by applicable laws and regulations, by lay users following the included instructions.  

INDICATIONS:  

SYLKE® Skin Closure is indicated for topical closure and coverage of thoroughly cleansed simple lacerations and minor cuts, where it may be used as the primary skin closure. SYLKE® Skin Closure is also indicated for topical closure and coverage of post-surgical skin incisions in which deeper layers have been closed, where it is used as an adjunct to sutures or staples. Wound edges must be easily approximated without tension. 

CONTRAINDICATIONS: 

  • SYLKE® Skin Closure is contraindicated for use on infected or contaminated wounds. Signs of infection may include: pus, pain, warmth, redness, swelling, and/or fever. If any signs of infection are present, seek medical attention. 

  • SYLKE® Skin Closure is contraindicated for use on wounds containing dirt, debris, or other contaminants. Wounds must be thoroughly cleansed prior to application. Trapping contaminants beneath the device may lead to infection. 

  • SYLKE® Skin Closure is contraindicated for use in high-tension wounds without the support of additional skin closure devices e.g., sutures. 

  • SYLKE® Skin Closure is contraindicated for use on wounds that are actively bleeding. 

  • SYLKE® Skin Closure is contraindicated for use below the skin surface. 

  • SYLKE® Skin Closure is contraindicated for use on mucosal surfaces or surrounding areas including lips, inside the mouth, eyes, eyelids, or the genital and perianal region. 

WARNINGS: 

  • SYLKE® Skin Closure is intended to be worn for up to 14 days. Early removal of SYLKE® Skin Closure may result in skin stripping, pain, and/or redness. To aid in early removal, SYLKE® Skin Closure may be soaked in warm water to soften the adhesive. 

  • If signs of infection are present around the wound covered by SYLKE® Skin Closure, contact a medical professional. 

  • Do not use SYLKE® Skin Closure if the sterile package is damaged or compromised. 

  • Individuals with a history of sensitivity to silk or adhesive materials may be at increased risk for skin irritation or allergic reaction. Monitor for signs of hypersensitivity, including redness, swelling, or rash at the application site. If any of these develop, remove the deviceand contact a healthcare provider. 

 PRECAUTIONS: 

  • Apply SYLKE® Skin Closure only to areas where adhesion can be obtained. Causes of inadequate adhesion include exudate, skin oils, moisture, or areas containing dense hair such as the scalp. 

  • Performance of SYLKE® Skin Closure under a secondary dressing has not been evaluated. Healthcare providers should use clinical judgment when considering the use of a secondary dressing over SYLKE® Skin Closure. Lay users should not apply a secondary dressing over SYLKE® Skin Closure without first consulting a healthcare provider. 

  • Submersion in water may impact the device's performance and duration of use.

ADDITIONAL INFORMATION: 

SYLKE® Skin Closure is not made with natural rubber latex. 

SYLKE® Skin Closure has not been evaluated for use in hyperbaric oxygen therapy (HBOT) environments. Safety and performance under hyperbaric conditions have not been established. Healthcare providers should use clinical judgment when considering the use of SYLKE® Skin Closure on patients undergoing HBOT.  

STORAGE: 

For best results, store in a cool, dry place away from direct sunlight. Do not use after the expiration date printed on the label. 

STERILITY: 

SYLKE® Skin Closure is sterilized by ethylene oxide gas. Do not re-sterilize. Do not use if package is opened or damaged. Do not use SYLKE® Skin Closure if strip is damaged or discolored. Discard any unused material. 

APPLICATION: 

SYLKE® Skin Closure should only be used on clean, dry wounds when the skin edges of the wound are easily approximated without tension. Examine environment where SYLKE® Skin Closure will be handled and applied and ensure the absence of visible dirt or contaminants. 

  1. Thoroughly cleanse and dry wound to prepare skin for proper adhesion of SYLKE® Skin Closure to the wound edges. (FIGURE A)
  2. Open sterile pouch. Remove SYLKE® Skin Closure strip from pouch. (FIGURE B)
  3. With the release liner still in place, hold the strip alongside the wound to measure the required length. The strip should extend at least 1 cm beyond each end of the wound. (FIGURE C)
  4. Using clean scissors, trim the strip to the appropriate length. (FIGURE D)
  5. Hold the strip and peel back the pre-slit tab to expose the adhesive. (FIGURE E)
  6. Place the exposed adhesive section on the skin at least 1 cm beyond one end of the wound. Press firmly to anchor the strip to the skin. (FIGURE F)
  7. While holding the anchored end in place, slowly peel away the release liner and press the adhesive strip along the length of the wound. The strip should extend at least 1 cm beyond the opposite end of the wound. If the wound length exceeds the length of a single strip, repeat previous steps with additional devices. (FIGURE G)
  8. Press firmly along the entire length of the strip to secure. Check that all edges are flat against the skin and no sections are lifted. Proper adhesion is achieved by applying pressure evenly across the strip. (FIGURE H)

INSTRUCTIONS FOR WEAR: 

  • When showering, do not scrub the device with a loofah, exfoliant, or other abrasive. Gently pat dry. 

  • Do not swim or fully submerge the wound while wearing SYLKE® Skin Closure. 

  • Keep wound clean and free of dirt and debris. Dirt trapped in the SYLKE® Skin Closure may cause irritation or infection. 

  • Contact a healthcare provider if the device detaches partially or completely before 14 days or if signs of infection or irritation are present. 

  • Remove SYLKE® Skin Closure after 14 days. 

  • SYLKE® Skin Closure is a single-use device and must not be reapplied after removal 

REMOVAL INSTRUCTIONS: 

  1. Gently lift the edge of SYLKE® Skin Closure at one end of the wound.
  2. Slowly peel SYLKE® Skin Closure away from the skin along the line of the wound. Use other hand to stabilize the surrounding skin to decrease tension as the SYLKE® Skin Closure strip is peeled off.
  3. If SYLKE® Skin Closure does not easily remove from skin, soak strip in warm water to soften adhesive.
  4. Once fully removed, discard the skin closure strip in a standard disposal bin. Do not re-use or re-sterilize the device.
  5. Any residual adhesive and/or dried wound exudate can be gently cleaned from the skin with warm soapy water. If residue remains, a medical adhesive remover may be used to loosen adhesive remnants. 

INFORM THE MANUFACTURER: 

If you have any questions or comments, please contact SYLKE®, Inc. at [email protected]. 

Please report a serious incident occurring in relation to the device to SYLKE®, Inc. at quality@sylke.com and the local regulatory authority.  

The Instructions for Use are provided in electronic format. If a paper copy is required, it can be requested free of charge, including shipping, via [email protected] 

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 4590162195

Discover Niche Categories That Outsell sylke dressing

Top-Converting Item to Boost Your Average Order

4.0 ★★★★★
Based on 2104 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
R
Verified Purchase
Rosalie
Dallas, US
★★★★★ 4
ALL SEASON IS TOO WARM!
Size: King, Style: All-Season
I got the King, All Season, to squeeze into a Queen duvet for extra floof and it's sooo cozy. Highly recommend. I redacted 1 star though because although it says All Season, the amount of down in here feels like it's for winter. The first night I used it I woke up dripping in sweat. It's currently March, I live in Los Angeles area, hitting about 75° weather outside rn, but I sleep with AC full blast at night (usually hit about 64 when I wake up). I can't sleep with it, I'll need to buy the "cool" one, and hope that isn't tooo thin. Don't get me wrong, it's a great insert, but holy hell, it's too heckin' warm. I saw someone else mention it and wish I had honed in on their comment. I don't wanna return it as it was used, so I'm stuck with it now. *UPDATE* I am back because I also bought the "Cool" blanket as well after experiencing the heat of the all season and it too is also too hot for me. I've had a duvet before but I guess not filled to the capacity of these blankets. If you're a hot sleeper maybe look elsewhere?
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 12, 2026
K
Verified Purchase
Kingsize
Dallas, US
★★★★★ 5
Buy this instead of the ‘brand name’ one
Size: Twin, Style: Warm
Tl:DR: Buy it, it’s super cheap, better than the one I paid 2x the price for and soft as it can get, and it really is a ‘Winter comforter’. This review is going to sound like I got paid off for it but I actually didn’t. I bought another comforter prior to this one, paid close to double of this one and that the ‘on sale’ price, and it is trash compared to this Amazon basics one. Both claim to be thick warm comforters but I can literally stack two of the other brand and maybe they’d be almost as thick as the Amazon one. I only bought this one because the other ‘winter’ one I bought was so thin and flimsy I figured adding another ‘cheapie’ one might make me not freeze to death. As soon as I arrived I noticed that this Amazon one was WAY thicker, nicer looking, softer and warmer than the old one. Just to try it out I stacked both of them together to see if I wouldn't freeze to death like I was doing with the old ‘expensive’ one: five minutes in and I was sweating. That’s all it took, I immediately removed the duvet cover from the old one, switched it to the Amazon one and threw the old one somewhere where I couldn’t see the money I had wasted, and yes the Amazon was warmer and softer even WITHOUT the duvet cover. I’m probably going to get the light version for when fall hits and I don’t quite need the heavy one yet. Buy it you won’t regret it and hey it’s Amazon brand so if you don’t like it they’ll take care of you, but I HIGHLY doubt you won’t love this thing.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 14, 2026
R
Verified Purchase
Ryan flores
Phoenix, US
★★★★★ 5
Great duvet insert
Size: King, Style: Light
Perfect duvet insert. I got a pretty expensive duvet to cover this and they worked great together. The fit was perfect and I didn’t feel like the duvet was smaller than its cover. This was a cheap option that keep us warm while not being too think. This product is also breathable and recommend if you live in a place that transitions from hot to cold often.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 6, 2026
J
Verified Purchase
Juliane P.
West Palm Beach, US
★★★★★ 5
Great mid-weight comforter
Size: King, Style: Light
Great comforter, especially for the price. I put it in the dryer for a bit when I first got it and it became nice and fluffy. Perfect mid-weight duvet.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 12, 2026
L
Verified Purchase
Lesley
Fort Morgan, US
★★★★★ 5
Hotel quality, budget friendly
Size: King, Style: Light
I’ve only used this for several nights. Overall I’m pretty happy with it, especially for the price. It is soft to the touch and has a nice, smooth feel. It’s lightweight but still provides enough warmth for mild to cool nights. I don’t like feeling weighed down when I sleep, so the light fill is actually a big plus for me. If you’re someone who sleeps hot, this is a solid choice. The corner tabs are super helpful. I paired it with a duvet cover and haven’t had issues with shifting or bunching. It also fits my bed well, though I could see it being a bit short on the sides if you have a very thick mattress. This is a great budget-friendly option and seems like it will be easy to maintain.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on September 19, 2025

recommand products